Short Answer
A Rolex GMT-Master II 16710 clone is a non-Rolex copy of the 40 mm GMT-Master II that Rolex produced from 1989 to 2007. Almost every clone runs an Asian-made automatic movement and ships with one of the three inserts the original used: Pepsi (blue and red), Coke (black and red), or plain black. Prices run from about 90 dollars for a disposable novelty to 600 dollars and up for a super clone. The differences that matter sit in the case profile, the bezel action, the dial print, and the movement.
High-Quality Fake Rolex GMT Master II 16710: Buyer's Guide
What the Real 16710 Is
- Case: 40 mm stainless steel Oyster, drilled lugs on early examples, no lug holes after about 2003.
- Bezel: bidirectional, 24-click ratchet, aluminum insert with a printed 24-hour scale.
- Movement: caliber 3185 until about 2000, then caliber 3186 with a Parachrom hairspring.
- Crystal: sapphire with a 2.5x cyclops over the date.
- Bracelet: Oyster 78790 or 78790A with solid end links on later examples.
Those five points are the checklist every clone gets graded against, whether the seller admits it or not.
Best Price Fake Rolex GMT-Master II 16710 Buying Guide
How to Assess a 16710 Clone in Person
- Measure the case across the bezel with calipers. Anything past 40.5 mm reads wrong on the wrist.
- Check the thickness at the case middle. The real watch sits near 12.5 mm, and many clones add a full millimeter through a stacked movement.
- Look at the crown guards from the side. Genuine guards taper into the case; cheap ones look pasted on and too square.
- Compare the insert colors in daylight. Pepsi clones drift toward purple and orange instead of deep blue and true red.
- Turn the bezel and count. You want 24 distinct clicks and light bidirectional travel, not a gritty 60-click feel.
- Read the dial print with a loupe. Check the serifs on the coronet and whether the GMT-Master II line at 6 o'clock stays crisp.
- Pull the crown to the second position and set the hour hand. On a working 3186-style movement the GMT hand jumps in one-hour steps.
- Tilt the watch under a lamp and study the cyclops. Magnification should land at 2.5x with no blue haze or edge distortion.
Movements You Will Find Inside
- DG3804 or a similar Chinese GMT movement. Cheap, loud rotor, no jump hour hand.
- ETA 2836-2 with a bolt-on GMT module. Reliable and serviceable, but the extra plate adds thickness.
- Cloned 3186. The closest match to the genuine feel, with a jump hour hand and smoother winding.
Where Clones Fail Most Often
- Dial printing and date font. The 2 and the 4 on the date wheel expose most fakes.
- Bezel insert font weight and color saturation.
- Bracelet end link fitment and the depth of the clasp stamp.
- Caseback engraving depth and the smoothness of the brushing.
Legal and Practical Notes
In the United States, importing counterfeit goods is prohibited, and US Customs and Border Protection can seize a shipment with no compensation to the buyer. Selling a clone as a genuine Rolex is trademark infringement and fraud, and it carries civil liability under the Lanham Act. Ownership issues matter too: no Rolex service center will touch the watch, parts for cloned movements come through the same gray channels as the watch, and resale value is near zero. A 16710 clone is a costume piece, and it should be priced and treated as one.